Lansky S0650 Hard Arkansas Hone for Lansky Sharpening Systems
- Stock Status: In Stock
- Product Code: LS-S065
£10.99
The Lansky S0650 Hard Arkansas Hone is for refining an already sharp edge. The Natural Hard Arkansas Hone is cut from traditional Arkansas Whetstone. Great for refining an already sharp edge, the Natural Hard Arkansas Hone is great for removing scrathes left from the Soft Arkansas Hone. Must be used with Nathan's Natural Honing Oil to achieve the best results.
Key Features:
Hard (450-650 grit) Naturally Occuring Novaculite Arkansas Hone
Threaded Brass Insert for Stainless Steel Screw
Ergonomic Plastic Housing
Arkansas stones have been coveted for generations for their simultaneous cutting and polishing qualities
*This product is included in the Natural Arkansas Sharpening System.
Instructions
For use with the Lansky Controlled Angle Sharpening Kits:
Step 1 - Insert the guide rod into the hone.
Step 2 - Make sure the rod is in line with the sharpening surface.
Step 3 - Bend the rod slightly, if needed.
Step 4 - Set the angle to the same one pre-established on your knife.
Step 5 - Sharpen away

Subject to age verificaiton if required
Delivery Options available at checkout
We accept Visa, Mastercard
ApplePay, GooglePay and PayPal